How to Choose a Makera A1S vs A1S ATC: Official Work Area, Tool Changer and Bundle Prices

Use official Makera specifications to choose between the A1S and the 12-tool A1S ATC, including the 200 mm versus 150 mm Y-axis travel and the standalone and bundle prices listed on the U.S. site on November 20, 2026.

How to Choose a Makera A1S vs A1S ATC: Official Work Area, Tool Changer and Bundle Prices

Disclosure: This page may contain affiliate links. They do not influence our editorial conclusions. Read the disclosure.

Our pick

  1. Top pick

    Makera

    Makera sells desktop CNC machines on its official U.S. site, makera.com. Official pages list Makera US Inc. in Austin, Texas, and, as of November 20, 2026, were...

    See price at Makera

Jump to the full guide

The official U.S. Makera A1S page sells two base machines and a set of bundles around optional MQL and 4th-axis hardware. The useful official differences are work area, whether you get a 12-tool automatic changer, and the prices that were on the page on November 20, 2026. This guide uses only those official specifications and prices. It is not a hands-on comparison.

The pre-order news records the November 20 price check. Official claims about the 600W spindle and the shipping and warranty rules are collected in the A1S review and the shopping guide.

Official Makera front-view product image of the A1S with a blue enclosure, a MAKERA A1S spindle head, and a TOOLDOCK labeled 12 + 1 ATC

Start with work area and tool changes

The official product page gives these work areas:

  • A1S: 30 cm (X) × 20 cm (Y) × 13 cm (Z), which Makera also lists as 11.81 × 7.87 × 5.12 in
  • A1S ATC: 30 cm (X) × 15 cm (Y) × 13 cm (Z), or 11.81 × 5.91 × 5.12 in

X and Z are the same. The official difference is Y travel. The page says the rear-mounted tool rack reduces the ATC model’s Y-axis travel from 200 mm to 150 mm, and that the rack can be removed to accommodate larger workpieces and enable pass-through machining. If most of your parts need the full 200 mm official Y travel, the standard A1S is the official specification that already includes it. If you buy the ATC model and later need that travel, the official text says the rack can be removed, which also means you would not be using the changer in that setup.

The official press release describes the non-ATC machine as a quick-tool-change edition for fast manual swaps, and the ATC edition as a 12-tool automatic changer for multi-step programs — roughing, finishing, drilling, and engraving — without manual intervention. Official product photos of the ATC configuration show a “TOOLDOCK” and a “12 + 1 ATC” label. If you regularly run jobs that need many tools, the official case for the ATC is fewer manual changes. If you mostly run simple jobs, the official standard A1S avoids the Y-travel trade-off and the higher standalone price.

Official standalone and bundle prices on November 20, 2026

These prices were live on the official U.S. product page at 2026-11-20T01:28:53Z (09:28 Asia/Shanghai). The first figure is the listed sale price; the second is the compare-at price shown on the same variant.

A1S (no automatic tool changer)

  • Standalone: $2,599 / $3,299
  • MQL Bundle: $3,079 / $3,819
  • 4th Axis Bundle: $2,979 / $3,699
  • 4th Axis MQL Bundle: $3,469 / $4,239
  • Ultimate Bundle: $4,659 / $5,529

A1S ATC

  • ATC Standalone: $3,499 / $4,299
  • ATC MQL Bundle: $3,979 / $4,819
  • ATC 4th Axis Bundle: $3,879 / $4,699
  • ATC 4th Axis MQL Bundle: $4,369 / $5,239
  • ATC Ultimate Bundle: $5,569 / $6,519

The official gap between the two standalone models on that date was $900 ($3,499 versus $2,599). Each official MQL bundle was $480 above the corresponding standalone price ($3,079 versus $2,599, and $3,979 versus $3,499). Each official 4th Axis bundle was $380 above the corresponding standalone price. The combined 4th Axis MQL bundles were $870 above standalone. The official Ultimate Bundles were $2,060 above the matching standalone prices. Those arithmetic differences are from the official numbers; Makera does not, on the text we captured, itemize every Ultimate Bundle component.

Makera’s November 19, 2026 press release said early pre-orders run from November 18 to December 4 and that the $2,599 and $3,499 standalone prices are the lowest pre-order prices across all phases. Official pre-sale graphics also showed a “A1S Launch Exclusive Gift - $109” line and “Free Access to Makera Studio.” The graphics do not name the $109 gift. The product-page body text we captured on November 20 did not itself repeat the December 4 date, so confirm the current page if you are buying near that window.

Official Makera pre-sale graphic of the A1S ATC Standalone showing $3,499, a $4,299 compare-at price, a $109 launch exclusive gift line, a TOOLDOCK labeled 12 + 1 ATC, and free access to Makera Studio

When official materials point to MQL or a 4th axis

The official release describes an optional MQL kit that delivers a fine mist to the cutting zone, with the stated aims of a better surface finish and longer tool life, and without the cleanup of traditional coolant. The official product page says the kit mounts on top of the A1S, barely adding to the footprint, and that one fill runs 40 hours. The official FAQ is explicit about air: the A1S does not need an air compressor for normal use, but an air compressor is required if you purchase the MQL accessory. Makera recommends a quiet, oil-free compressor with a tank and a maximum pressure of at least 90 PSI (6.2 bar). Official North America examples are the California Air Tools 2010A and 8010 / 8010A. The FAQ says you may choose your own lubricant; if you are unsure, Makera recommends Coolube 2210AL for general-purpose metal machining. An 8 mm tubing adapter is mentioned, and the FAQ notes that quick-connect fitting standards vary by region.

If you do not already have a suitable compressor, the official MQL bundle price is not the only extra cost; you would also need a compressor that meets those official recommendations. If you do not plan to use MQL, the official FAQ says the machine can be used normally without a compressor, and the standalone or 4th-axis-only bundles are the official configurations that omit MQL.

The official page also offers 4th-axis bundles and combined 4th-axis plus MQL bundles, and it lists a 4-axis module as optional. The page text we used for this guide does not spell out every 4th-axis specification in the same detail as the work area and MQL FAQ. If rotary work is the reason you are shopping, read the current official 4th-axis description on the product page before choosing a bundle, rather than inferring capability from the bundle name alone.

The official release also describes a built-in Smart Vision System with automatic probing for workpiece location, height detection, leveling, and alignment, and it presents Makera Studio and the Makerables project library as part of the workflow. Official pre-sale graphics say Studio access is included. Those features are listed for both configurations in the materials we reviewed; they are not, in those materials, the thing that distinguishes A1S from A1S ATC.

Match the official shipping timeline before you order

Both machines follow the same official pre-sale shipping rules. The product page says shipments begin in January 2027 from the factory, with an estimated 45–70 days by sea, and a possible extra 30 days around Chinese New Year. The official shipping policy’s A1S / A1S ATC table lists free shipping to the lower 48 U.S. states, checkout-calculated rates for Hawaii, Alaska, Guam, and Puerto Rico, sea shipment plus FedEx or UPS, a January start, 30–70 days’ transit, and origin in mainland China. Makera does not ship to P.O. boxes or APO. Orders are fulfilled in the order of completed payment. If you need a machine before that official window, the A1S pre-order is not the official timeline that meets it, regardless of which configuration you pick.

The official refund policy is also the same for both machines when you buy at makera.com: 30 days after receipt, restocking fees that vary by condition and timing, and a one-year U.S. warranty from receipt, as detailed in the shopping guide. A change-of-mind return of a CNC machine can carry official restocking fees of 10%, 15%, or 30% depending on whether the package is unopened, opened unused, or used, once you are past the first 14 calendar days.

A simple official-spec checklist

  • Choose the standard A1S if you want the official 200 mm Y travel, manual or quick tool changes, and the lower standalone price of $2,599 as listed on November 20, 2026.
  • Choose the A1S ATC if you want the official 12-tool automatic changer and accept the official 150 mm Y travel (or plan to remove the rack when you need more space). The official standalone price on that date was $3,499.
  • Add an official MQL bundle only if you will use the lubrication kit and already have, or will buy, an air compressor that meets Makera’s official 90 PSI, oil-free, tank-equipped recommendation.
  • Add a 4th-axis bundle only after reading the current official 4th-axis description, not only the bundle title.
  • Treat January 2027 plus a 30–70 or 45–70 day sea shipment, and a possible 30-day Chinese New Year delay, as the official delivery framework for every A1S variant.

References

Meet your guide

Lipeiguan

author