How to Set Up and Use the Baby Brezza Formula Pro Advanced
A research-based setup guide for the Baby Brezza Formula Pro Advanced, covering official rinse-and-assemble steps, powder settings, 2-to-10 oz bottles, and funnel cleaning from the August 1, 2025 manual.

Disclosure: This page may contain affiliate links. They do not influence our editorial conclusions. Read the disclosure.
Our pick
- See price at Baby Brezza
Top pick
Baby Brezza
Maker of baby feeding and bottle-care appliances, including formula makers, bottle washers and sterilizer-dryers, sold at babybrezza.com.
Steps in this guide
The Baby Brezza Formula Pro Advanced mixes, warms and dispenses infant formula into a bottle, using a powder setting you choose for your formula brand and an ounce size that measures water only. This is a research-based how-to drawn from Baby Brezza's official U.S. Formula Pro Advanced instruction manual (FRP0046, dated August 1, 2025) and the official product page as of November 18, 2026, not a hands-on test. On that date the official U.S. store listed the Formula Pro Advanced at $229.99 in White, Black (website exclusive), Charcoal and Slate (website exclusive), all in stock. The Formula Pro Mini was listed at $199.99 and in stock; the Formula Pro Advanced WiFi was listed at $329.99 and was not available. Confirm the live listing before you buy. This article follows the non-WiFi Formula Pro Advanced manual, which says it covers all models except Formula Pro Advanced WiFi. For which machine to buy, see the Formula Pro Advanced vs WiFi vs Mini guide. Features, warranty details and owner feedback are in the Formula Pro Advanced review. Shipping, returns and price match are in the Baby Brezza shopping guide.

First setup: rinse the tank, wash the parts, then add powder
The official manual's first warning is not to start taking the machine apart until you rinse the water path. Place the Formula Pro Advanced on a level counter, turn it so the back faces you, remove the water tank, wash it with warm soapy water, rinse and dry. Fill the tank with bottled water that is suitable for infant formula, or with boiled water that has been cooled to room temperature. Put the tank back on the base, turn the machine to face you, and plug it in. The manual says the machine beeps once and the LCD lights up; if the screen stays dark, press the power button.
Next, put a cup or bottle larger than 10 oz under the funnel, press the ounce button until the display reads 10 oz, and press the "water only" button so the machine dispenses 10 oz of water. Discard that water, or use it for plants, as the manual suggests. Then unplug the machine and wash all of the removable parts except the base. The official parts list includes the powder container lid, stirring wheel, locking cover with silicone scraper, measuring wheel, powder container, axle, control panel, funnel cover, funnel, funnel compartment, drip tray, base and power cord. After hand-washing those parts, the manual says they must be completely dry before you reassemble them. The powder container is an exception on the dishwasher: the official callout says never to clean the powder container in a dishwasher, sterilizer or microwave. The product page separately describes the water tank as dishwasher-safe.
The set-up pages then walk through reassembly: funnel and funnel cover into the funnel compartment; measuring wheel into the powder container, flat side down, over the axle; locking cover's front edge in the recess inside the front of the powder container, under the tab; axle on the base; powder container on the base; stirring wheel on the axle (the cover tip says the wheel snaps firmly and can take a strong pull to remove). Fit the powder container lid and turn it clockwise until it stops, so the safety switch engages and the container locks to the base. Fit the drip tray so the mouth of the bottle sits as close to the funnel as possible, and push the tray firmly against the base so it does not fall off mid-bottle.
Official water rules are strict. Use distilled or boiled water cooled to room temperature. Never pour boiling or hot water into the tank. The manual warns that unboiled tap water and unsterilized bottles can pose health risks, and that you should prepare only one bottle at a time, feed immediately, and check that the mixture is at a safe temperature before serving. Do not run the machine without water in the tank, and never remove the powder container, lid, funnel or tank while it is operating.

Making a bottle: powder setting, ounces and temperature
Look up the correct powder setting, 1 through 10, for your formula brand and type at babybrezza.com/FPA or the Formula Pro global settings finder before the first bottle. The manual says choosing the correct setting is essential, and the troubleshooting chart lists a wrong setting as a cause of too much or too little powder.
To make a bottle, press the powder-setting button until you reach that number, then press the ounce button to choose how much water to dispense. Official ounce sizes measure water volume only; they do not include the volume of the added powder, so the finished level in the bottle will look higher than the size you selected. The manual's example is that 4 oz of water plus powder is about 4.5–4.75 oz depending on the formula. The product page says the machine can dispense between 2 and 10 oz.
Press the temperature button to choose one of the three official settings: slightly warmer than body temperature, body temperature, or room temperature. The temperature indicator flashes while the water is heating and stays solid when the selected temperature is reached. Press Start. The machine dispenses powder and water together and stops on its own. It remembers the last powder setting and ounce size even if you unplug it, so you do not have to re-enter the setting every time. You can still change the ounce size or setting before the next bottle.
After dispensing, check for clumps and shake or stir if needed, then check the temperature and feed. The product page says the mixing system is designed to limit air bubbles and to produce a consistent mixture; some official wording also notes that some formula powders are inherently difficult to mix and may still clump. Refill the powder when the arms of the stirring wheel become visible; the manual says that step is important for accurate measuring. Fill powder between the MIN and MAX lines on the container, and wipe up spilled powder.
Other official indicators include: Powder Lid Open, if the lid is not closed completely or is not seated correctly; Low Water, when you need to refill the tank; Clean Funnel, which lights after every 4 bottles; and Funnel Out, if the funnel is missing or not pushed in fully. To drain all water from the machine, press and hold "water only" for 5 seconds; water will run until the machine is empty.
The product page also lists a 1-year warranty, plus a free 6-month extended warranty when you buy directly from babybrezza.com, and says the warranty is not valid if the product is shipped outside the United States. Register at babybrezza.com/register if you want that official registration path. Technical data in the manual lists models including FRP0046, FRP0131, FRP0132 and FRP0133, a 120V ~ 60Hz supply, and 260W rated power.

Daily cleaning, monthly descaling and storage
The manual puts this in capitals: it is very important to clean the funnel after every 4 bottles so the machine keeps dispensing accurately. Daily cleaning does not require removing the powder container or its internal parts. Pull the funnel and funnel cover out and down, wash them with warm soapy water, rinse well, and dry them completely before reinstalling. Wipe the powder-dispensing hole on the underside of the powder container with a dry paper towel or a soft dry cloth. Baby Brezza suggests keeping a spare funnel and cover so you can swap the one that needs washing; you still have to wipe that dispensing hole.
Once a month, hand-wash the parts shown in the monthly diagram with warm soapy water, rinse and dry them thoroughly, and hand-wash the water tank the same way. To descale the internal heater, the official steps are: empty the tank and fill it with 20 oz distilled vinegar plus 20 oz purified water, or use Baby Brezza Descaler from babybrezza.com instead of mixing vinegar and water; put the tank on the base; place a cup larger than 10 oz under the funnel; dispense 10 oz with the "water only" button, empty the cup, and dispense another 10 oz; unplug the machine, remove and empty the tank, and let the machine sit for 4 hours; then wash, rinse and fill the tank to the MAX line with purified water, run 10 oz water-only cycles until the Low Water indicator comes on, and refill with purified water before normal use.
For long-term storage, remove the powder container parts, funnel, funnel cover, drip tray and water tank, wipe all formula residue off the base with a damp cloth and dry it, wash and dry the powder parts, reassemble them, run the monthly descaling steps, then press and hold "water only" for 5 seconds to empty the machine completely, unplug it, and dry and reinstall the funnel, cover and tank.
If a bottle does not start, the official chart points to simple causes first: the plug, the power button, a funnel that is not fully inserted, water below the MIN line, a powder container that is not seated, a lid that is not turned clockwise until it locks, a lid put on backwards, or water that is still too cold (the temperature symbol flashing). Too much or too little powder can mean a locking cover that is not under the tab, a wrong setting, a low powder level, parts that were not fully dried after washing, or a silicone scraper that is not installed correctly. Contact Baby Brezza at 1-888-396-6552 or use the Formula Pro Advanced Information Center rather than returning the machine to a store first, which is the manual's own instruction.
This setup suits a parent who wants official, bottle-by-bottle steps for the $229.99 Formula Pro Advanced, including the powder-setting lookup, the 2-to-10 oz water range, and the every-4-bottles funnel cleaning that the manual ties to accuracy. If you are still choosing among the Advanced, Mini and WiFi models, start with the which-to-buy guide. If you also need a washer or sterilizer, see the bottle washer and sterilizer buying guide and, for the SuperFast Sterilizer Dryer recall, the recall explainer. Always follow your formula brand's label and the live Baby Brezza setting for that powder.
References
- Baby Brezza, Formula Pro Advanced Baby Formula Dispenser product page, including listed prices, colors, warranty wording and features (accessed November 18, 2026). https://babybrezza.com/products/formula-pro-advanced
- Baby Brezza, "Formula Pro Advanced Instructions for set-up, use and cleaning for all models except Formula Pro Advanced Wifi," FRP0046 FPA BW IM US 250801 (August 1, 2025). https://cdn.shopify.com/s/files/1/1465/2384/files/FRP0046_FPA_BW_IM_US_250801.pdf?v=1756173393
- Baby Brezza, user manuals for the United States, including the Formula Pro Advanced, WiFi and Mini manuals (accessed November 18, 2026). https://babybrezza.com/pages/user-manuals-united-states
- Baby Brezza, Formula Pro Advanced Information Center and formula settings finder (accessed November 18, 2026). https://babybrezza.com/pages/fpa-information-center
- Baby Brezza, Formula Pro Mini and Formula Pro Advanced WiFi product pages (accessed November 18, 2026). https://babybrezza.com/products/formula-pro-mini
Meet your guide
Lipeiguan
author