Car Ramps vs Jack Stands: How to Choose VEVOR Car Ramps (Low Profile, High Profile, Hydraulic)
When drive-on car ramps beat jack stands, how to pick lift height, incline and capacity, and which VEVOR low-profile, high-profile and hydraulic ramps and jack stands suit which vehicles, from VEVOR's listed specs and prices.

Disclosure: This page may contain affiliate links. They do not influence our editorial conclusions. Read the disclosure.
Our pick
- See price at VEVOR
Top pick
VEVOR
Home improvement and equipment brand founded in 2007, selling tools, kitchen equipment and appliances on vevor.com and through online marketplaces.
Steps in this guide
If you change your own oil or check under your car at home, you need a safe way to hold the vehicle in the air. The two common options are drive-on car ramps and a floor jack paired with jack stands. VEVOR sells both, from $26 low-profile plastic ramps to $188 hydraulic ramps that lift as high as 14.2 inches. This guide explains when ramps make more sense than jack stands, how to choose lift height and capacity, and which VEVOR ramps and stands fit which cars. It's based on VEVOR's product pages and listed specs as of November 16, 2026; we haven't used these products ourselves, and prices on vevor.com change often.

Car ramps vs jack stands: which do you need?
Ramps are the quickest option for jobs where the wheels can stay on the car: oil and filter changes, inspecting the exhaust, or looking for leaks. You line up the front wheels, drive slowly onto the ramps, and the car is up. There's no jacking point to find and nothing to adjust.
Jack stands are for jobs where a wheel has to come off, such as brakes, tire rotations and suspension work. You lift the car with a floor jack at the manufacturer's jacking point, then lower it onto stands. Stands also give you more height choices, since they adjust with a ratchet bar.
Many home mechanics end up with both. VEVOR itself says its lowest ramps are "recommended to pair with a jack during repairs," since a 2.6-inch lift is mainly there to give a low car enough clearance for a floor jack to slide under. If you still need the jack, see our guide to choosing a VEVOR floor jack.
How to choose car ramps
1. Match lift height to your car's clearance. Higher ramps give you more room to work, but a low car's front bumper can hit a tall ramp before the tires reach it. VEVOR splits its range the same way: low-profile ramps (about 2.6 inches of lift) for low-chassis cars, high-profile ramps (6.3 to 6.7 inches) for SUVs, trucks and Jeeps, and hydraulic ramps (10 to 14.2 inches) for high-chassis vehicles.
2. Check the incline. A gentler incline is easier to drive up without the bumper scraping. VEVOR lists a 17-degree incline for both its 2.6-inch low-profile ramps and its 6.7-inch high-profile ramps.
3. Read capacity ratings carefully. Ramp listings often lead with a big "GVW" (gross vehicle weight) number, but what matters is how much weight each ramp actually carries. Your car's gross vehicle weight rating is on the sticker in the driver's door jamb; with only the front wheels on the ramps, each ramp carries less than half of it. On VEVOR's 2.6-inch low-profile set, the listing title says "20,000 lbs GVW," while the description says each ramp holds up to 5,000 pounds and the pair supports vehicles up to 10,000 pounds in total. Use the more conservative per-ramp figure.
4. Consider weight and storage. Plastic (PP) ramps are light: VEVOR lists the 2.6-inch pair at 5.3 to 6.5 lbs and the 6.7-inch pair at 18.5 lbs. The steel hydraulic set weighs 76.3 lbs.
5. Use them on a hard surface. VEVOR's own instruction on each ramp page is to place the ramps on a hard, high-friction surface before driving onto them. Slick garage floors and gravel are where ramps tend to slide.
Best VEVOR car ramps by vehicle type
| Ramp | Lift height | Capacity (VEVOR's figures) | Net weight | Best for | Price on vevor.com |
|---|---|---|---|---|---|
| Low Profile Car Ramps, 2 pcs | 2.6 in, 17° incline | 5,000 lbs per ramp (listed as 20,000 lbs GVW) | 5.3 lbs | Low sports cars and sedans; clearance for a jack | $25.90 |
| Low Profile Car Ramps, 2 pcs (2.56 in) | 2.56 in | 20,000 lbs GVW | 6.5 lbs | Same job, longer 27.4 in ramp | $26.35 (4-pack $45.90) |
| Single Auto Service Ramp | 5.5 in | 20,000 lbs / 9 tons | 6.8 lbs | Tandem-wheel trucks, vans, RVs | $29.36 each |
| High Profile Car Ramps, 2 pcs | 6.7 in, 17° incline | 16,000 lbs GVW | 18.5 lbs | SUVs, trucks, Jeeps, most cars | $73.90 |
| High Profile Car Ramps, 2 pcs | 6.3 in | 13,000 lbs GVW | 34.7 lbs | SUVs and trucks; 52.5 in long | $114.90 |
| Hydraulic Car Ramps, 2 pcs | 10 to 14.2 in | 11,000 lbs (5 T) per ramp | 76.3 lbs | High-chassis SUVs and trucks | $187.90 |
For low cars: VEVOR Low Profile Car Ramps (2.6 in)
VEVOR designed these for low-chassis vehicles. The 17-degree incline is meant to let small cars climb on without scraping, and the deep grooves in the surface are designed to hold the tires in place. At just over 5 lbs for the pair they're easy to store in a trunk. Remember that 2.6 inches isn't much working room: think of them as a way to get a low car high enough for a floor jack, then put it on stands.

VEVOR also sells a longer 2.56-inch version (27.4 x 7.87 x 3 inches per ramp) in two-packs and four-packs. The four-pack lets you raise all four wheels slightly, for example to get a jack under a very low car from the side.
For most SUVs and trucks: VEVOR High Profile Car Ramps (6.7 in)
This is the pick for most oil changes on SUVs, pickups and Jeeps. It lifts 6.7 inches with a 17-degree incline, VEVOR rates the pair at 16,000 lbs GVW, and the PP ramps are stackable for storage. VEVOR says they fit "SUVs, trucks, Jeeps, and most vehicles." Check your front bumper height before buying if your car sits low.

The 6.3-inch version costs more ($114.90) and is heavier at 34.7 lbs for the pair, with a lower 13,000 lbs GVW rating, so the 6.7-inch set is the better value unless you prefer the longer 52.5-inch ramp.
For dual rear wheels: VEVOR Single Auto Service Ramp (5.5 in)
This single plastic ramp is made for tandem-wheeled vehicles, such as trucks, vans and motorhomes, rather than ordinary cars. VEVOR rates it at up to 9 tons (20,000 lbs) and says it raises the vehicle 5.5 inches. It's sold individually at $29.36, so buy two if you need to lift both sides.

For more height: VEVOR Hydraulic Car Ramps
If 6.7 inches isn't enough room, VEVOR's steel hydraulic ramps start at 10 inches and lift to 14.2 inches using a built-in hydraulic jack, with height markings to help you set both sides evenly. Each jack supports up to 11,000 lbs (5 T), according to VEVOR. Two things to know: VEVOR says they need two people operating the handles on both sides at the same time, and at 76.3 lbs and 44.9 x 12.6 x 11.6 inches per pair they're far bulkier to store than plastic ramps.

If you need jack stands instead
For wheel-off jobs, VEVOR's steel jack stands come in pairs with a ratchet height adjustment. The handle doubles as a carrying handle and the ratchet bar, and the stands use a metal locking pin.
| Jack stands (pair) | Capacity per stand | Height range | Locking | Weight | Price |
|---|---|---|---|---|---|
| 3 Ton (HM3141B) | 3 tons / 6,600 lbs | 10.8 to 16.3 in | Single lock | 11 lbs | $29.61 |
| 3 Ton (HM3141C) | 3 tons / 6,600 lbs | 10.8 to 16.3 in | Double locking | 11.5 lbs | $33.90 |
| 6 Ton (HM6141C) | 6 tons / 13,000 lbs | 14.6 to 22.8 in | Double locking | 20.7 lbs | $50.90 |

The 3-ton stands suit most cars and small SUVs. The double-locking version adds a second lock for about $4 more, which we think is worth it. The 6-ton stands start higher (14.6 inches), which is useful for lifted trucks and RVs but may be too tall to fit under a low car. VEVOR's AI-generated review summary on these pages says buyers praise the sturdy, double-locking design, while some noted issues with uneven surfaces or locking pin alignment, so check that both pins seat fully before you go underneath.
Safety basics before you get under the car
- Work on hard, level ground, and set the parking brake.
- Drive onto ramps slowly and straight, and stop when the tires sit in the cradle at the top.
- Chock the wheels that stay on the ground.
- Never work under a car held up only by a jack; lower it onto stands first.
- Read the manual that comes with your ramps or stands; VEVOR links user manuals on many of its product pages.
Bottom line
For oil changes on most SUVs and trucks, the VEVOR 6.7-inch High Profile Car Ramps are the simplest buy. Low sports cars need the 2.6-inch Low Profile Ramps, usually paired with a floor jack and the 3-ton double-locking jack stands. Choose the hydraulic ramps only if you need 10 inches or more of lift and have space to store them. For VEVOR shipping and returns, see our guide on how to buy from VEVOR and our Costway vs VEVOR shipping, returns and warranty comparison.
References
- VEVOR, "Low Profile Car Ramps – 2.6 in Lift, 20,000 lbs GVW": https://www.vevor.com/loading-ramps-c_10409/vevor-car-ramps-2-pcs-20000-lbs-gvw-capacity-2-6-in-lift-height-portable-low-profile-car-service-ramps-for-home-garage-maintenance-oil-changes-heavy-duty-for-low-chassis-vehicle-support-jack-p_010122464118
- VEVOR, "Car Ramps, 2 PCS 20000 lbs GVW Capacity, 2.56 in Lift Height": https://www.vevor.com/loading-ramps-c_10409/vevor-car-ramps-2-pcs-20000-lbs-gvw-capacity-2-56-in-lift-height-portable-low-profile-car-service-ramps-for-home-garage-maintenance-oil-changes-heavy-duty-for-low-chassis-vehicle-support-jack-p_010231836516
- VEVOR, "Car Ramps, 2 PCS 16000 lbs GVW Capacity, 6.7 in Lift Height": https://www.vevor.com/loading-ramps-c_10409/vevor-car-ramps-2-pcs-16000-lbs-gvw-capacity-6-7-in-lift-height-portable-high-profile-car-service-ramps-for-home-garage-maintenance-and-oil-changes-heavy-duty-for-truck-suv-vehicle-repair-black-p_010250392288
- VEVOR, "Car Ramps, 2 PCS 13000 lbs GVW Capacity, 6.3 in Lift Height": https://www.vevor.com/loading-ramps-c_10409/vevor-car-ramps-2-pcs-13000-lbs-gvw-capacity-6-3-in-lift-height-portable-high-profile-car-service-ramps-for-home-garage-maintenance-and-oil-changes-heavy-duty-for-truck-suv-vehicle-repair-black-p_010199560850
- VEVOR, "Hydraulic Car Ramps, 2 PCS 11000 lbs 5T, 10-14.2 Inch Lift Height": https://www.vevor.com/loading-ramps-c_10409/vevor-hydraulic-car-ramps-2-pcs-11000-lbs-5t-10-14-2-inch-lift-height-heavy-duty-hydraulic-vehicle-ramps-portable-car-lifts-for-home-garage-maintenance-and-oil-changes-truck-vehicle-auto-repair-p_010720406337
- VEVOR, "Car Service Ramp, 20000 lbs 10 Ton Loading Capacity, 5.5 in Lift": https://www.vevor.com/hydraulic-car-ramps-c_10307/vevor-car-service-ramp-20000-lbs-10-ton-loading-capacity-5-5-lift-car-ramp-low-profile-plastic-tire-ramp-heavy-duty-truck-ramp-for-oil-changes-wheels-lift-vehicle-maintenance-1-pack-p_010303933285
- VEVOR, "Jack Stands, 3 Ton (6,600 lbs), Double Locking": https://www.vevor.com/jack-stands-c_12064/vevor-jack-stands-3-ton-6-600-lbs-capacity-10-8-16-3-in-adjustable-height-heavy-duty-steel-jack-auto-stands-with-double-locking-for-lifting-suv-pickup-car-utv-atv-1-pair-black-and-orange-p_010542657360
- VEVOR, "Jack Stands, 6 Ton (13,000 lbs), Double Locking": https://www.vevor.com/jack-stands-c_12064/vevor-jack-stands-6-ton-13-000-lbs-capacity-14-6-22-8-in-adjustable-height-heavy-duty-steel-jack-auto-stands-with-double-locking-for-lifting-rv-small-truck-car-suv-1-pair-black-and-orange-p_010494952311
- VEVOR, "Jack Stands, 3 Ton (6,600 lbs), Locking": https://www.vevor.com/jack-stands-c_12064/vevor-jack-stands-3-ton-6-600-lbs-capacity-10-8-16-3-in-adjustable-height-heavy-duty-steel-jack-auto-stands-with-locking-for-lifting-suv-pickup-car-and-utv-atv-1-pair-black-and-orange-p_010171268159
Meet your guide
Lipeiguan
author