How to Choose a VEVOR Floor Jack: Capacity, Low-Profile Lift Range, Single vs Dual Piston
A step-by-step guide to VEVOR's low-profile floor jacks: matching 1.5- to 4-ton capacity to your vehicle, reading minimum and maximum lift height, single vs dual piston pumps, steel vs aluminum frames, safety features and safe use with jack stands.

Disclosure: This page may contain affiliate links. They do not influence our editorial conclusions. Read the disclosure.
Our pick
- See price at VEVOR
Top pick
VEVOR
Home improvement and equipment brand founded in 2007, selling tools, kitchen equipment and appliances on vevor.com and through online marketplaces.
Steps in this guide
A floor jack is the tool that turns a roadside-style tire change into a comfortable driveway job: it rolls under the car, lifts quickly with a long handle, and lets you set jack stands for brake, suspension or oil work. VEVOR sells more than a dozen low-profile floor jacks, from compact 1.5-ton models to a 4-ton steel jack that weighs over 100 pounds with accessories. Their names look almost identical, so this guide explains the four specs that actually separate them (capacity, lift range, pump type and frame material) and shows which VEVOR model fits which kind of vehicle and garage. All specs below come from VEVOR's US product pages as of November 15, 2026. Prices are VEVOR's listed prices on that date and change often.

Step 1: Match the capacity to your vehicle
Floor jacks are rated in tons: 1.5 tons is 3,300 lbs, 2 tons is about 4,400 lbs, 2.5 tons is about 5,500 lbs, 3 tons is about 6,600 lbs and 4 tons is about 8,800 lbs. A floor jack lifts one corner or one end of a vehicle at a time, not the whole thing, but extra capacity still gives you margin and usually comes with a longer frame and taller lift.
VEVOR's own listings describe the intended vehicles this way:
- 1.5 ton: lighter, low cars such as sports cars and sedans.
- 2 ton: sports cars, family sedans, light trucks and SUVs.
- 2.5 ton: family cars, trucks and SUVs.
- 3 ton: cars, trucks and SUVs, with more lift for taller vehicles.
- 4 ton: sports cars, sedans, light pickups and SUVs, for pros or heavy DIY use.
Check your vehicle's weight in the owner's manual or on the label in the driver's door jamb before you choose. If you own both a sedan and a pickup, size the jack for the heavier vehicle.
Step 2: Check minimum and maximum height
Lift range matters as much as capacity. The minimum height is how low the saddle sits when fully lowered; it must slide under your car's jacking point. The maximum height is how high it can raise that point, which determines whether you can fit jack stands and get a wheel off the ground on a lifted SUV or truck.

Here is how VEVOR's low-profile jacks compare, using the figures from each product's feature list or specifications table:
| VEVOR model | Capacity | Lift range | Frame | Pump | Weight | Listed price |
|---|---|---|---|---|---|---|
| 1.5 Ton Aluminum and Steel Racing Floor Jack | 3,300 lbs | 80-365 mm (about 3.15-14.4 in) | Aluminum + steel | Dual piston | Not stated in specs | $125.90 |
| 2 Ton Hydraulic Floor Jack | 4,409 lbs | 4.9-13.2 in | Q235A steel | Single piston | 18.8 lbs | $40.09 |
| Low Profile Aluminum Floor Jack, 2 Ton | 4,409 lbs | 3.2-14.6 in | Q235A steel + 6061 aluminum alloy | Dual piston | 35.8 lbs | $129.91 |
| 2.5 Ton Heavy-duty Steel Racing Floor Jack, Single Piston | 5,500 lbs | 3.35-14.96 in | Steel | Single piston | Not stated in specs | $64.32 |
| 3 Ton Heavy-duty Steel Racing Floor Jack, Dual Pistons | 6,600 lbs | 3-19.5 in | Steel | Dual piston | Not stated in specs | $159.90 |
| 4 Ton Low Profile Floor Jack | 8,818 lbs | 3.9-21.5 in | Iron/steel | Dual piston | 102.5 lbs with accessories | $235.91 |
A few practical rules follow from those numbers:
- Lowered sports cars or cars with front splitters: look for a minimum height around 3 to 3.35 inches. The 2-ton single-piston model starts at 4.9 inches, which may not clear a low car.
- SUVs and pickups: look at maximum height. The 3-ton (19.5 in) and 4-ton (21.5 in) models lift far higher than the 13-15 inch range of the smaller jacks.
- Note on listings: some VEVOR product images show slightly different figures than the text (for example, the 4-ton page's image lists 21.9 in / 555 mm while the feature text says 21.5 in / 545 mm). When in doubt, use the lower figure.
Step 3: Decide between single and dual piston
VEVOR offers both pump types. A single-piston pump is the simpler, cheaper design; you pump more strokes to reach full height. A dual-piston (dual pump) design moves more fluid per stroke, so the saddle reaches the car faster. VEVOR's 3-ton dual-piston listing says it reaches full height in 7 full strokes in its feature text, while its product images advertise 6 strokes when unloaded.

If you only rotate tires a few times a year, a single-piston jack is usually enough. If you do frequent wheel swaps, track days or work on several vehicles, the faster lift of a dual-piston jack saves time on every job.
Step 4: Steel, aluminum or hybrid?
- All-steel jacks (such as the 2.5-ton and 3-ton steel models) are the most common and most affordable per ton of capacity, but they are heavy to carry.
- Aluminum and steel hybrids (the 1.5-ton racing jack and the 2-ton "aluminum" jack) save some weight. Note that VEVOR lists the 2-ton aluminum jack at 35.8 lbs because its frame combines Q235A steel with 6061 aluminum alloy; it is not an all-aluminum jack.
- The 4-ton is built for stability under heavy loads, and at 102.5 lbs with accessories it is meant to stay in the garage rather than ride in a trunk.

If you need to take a jack to the track or keep it in a vehicle, the lighter 2-ton single-piston model (18.8 lbs) is the most portable option in the table, at the cost of a higher minimum height.
Step 5: Look at the safety features
Most of these VEVOR listings describe a built-in safety or overload relief valve, and the 2.5-ton and 3-ton steel racing models state compliance with CE (EN 1494), UKCA and the ASME PALD-2014 safety standard. Other details worth checking on the product page:
- Saddle: the steel models list a 360-degree rotating rubber saddle that can be removed and replaced, which helps you line up with the jacking point and protects the pinch weld.
- Handle: longer handles reduce effort. VEVOR lists a 31.5-inch two-piece handle on the 2.5-ton steel jack and a 45.3-inch handle on the 3-ton steel jack; both come apart for storage.
- Handle bumper: a foam bumper keeps the handle from hitting the bodywork.

How to use a floor jack safely
- Park on flat, solid ground, set the parking brake and chock the wheels that stay on the ground.
- Find the jacking points listed in your owner's manual.
- Close the release valve by turning the handle clockwise, center the saddle under the jacking point, and pump smoothly.
- Place jack stands rated for the vehicle at the support points, then lower the car onto the stands. VEVOR's own listings note that for long maintenance you should use a jack stand; never work under a vehicle held up only by a jack.
- To lower, turn the handle counterclockwise slowly, as VEVOR's instructions describe, and keep hands and feet clear.
Which VEVOR floor jack should you buy?
- Most sedans and small SUVs on a budget: the 2.5-ton steel single-piston jack, with a 3.35-14.96 inch range at $64.32.
- Mixed garage with an SUV or pickup: the 3-ton steel dual-piston jack, for its 19.5-inch maximum height and faster lift.
- Low cars and frequent wheel swaps: the 2-ton aluminum and steel dual-piston jack, with a 3.2-inch minimum height.
- Portable spare-tire kit: the 2-ton single-piston jack at 18.8 lbs, if your car has enough ground clearance for its 4.9-inch minimum.
- Heavy use and tall vehicles: the 4-ton jack, if you have space for a 32-inch-long, 100-plus-pound tool.

Before you order
VEVOR's shipping, return and warranty terms differ from those of a typical auto-parts store, so read our guide on how to buy from VEVOR and our Costway vs VEVOR comparison for shipping, returns and warranty details. If you would rather have a shop do the work, see our explainers on Pep Boys tire services and Pep Boys car battery replacement. And if a weekend car project is on your list, our Govee car underglow install guide covers another popular DIY job.
References
- VEVOR, Floor Jacks category: https://www.vevor.com/floor-jacks-c_11489
- VEVOR, 1.5 Ton Low Profile Aluminum and Steel Racing Floor Jack: https://www.vevor.com/floor-jacks-c_11489/vevor-1-5-ton-low-profile-aluminum-steel-racing-floor-jack-dual-pump-lift-car-p_010110523994
- VEVOR, 2 Ton Hydraulic Floor Jack (single piston): https://www.vevor.com/floor-jacks-c_11489/vevor-low-profile-floor-jack-2-ton-heavy-duty-single-piston-hydraulic-pump-p_010760609021
- VEVOR, Low Profile Aluminum Floor Jack, 2 Ton (dual piston): https://www.vevor.com/floor-jacks-c_11489/vevor-low-profile-floor-jack-2-ton-heavy-duty-dual-piston-rapid-pump-p_010471358842
- VEVOR, 2.5 Ton Heavy-duty Steel Racing Floor Jack, Single Piston: https://www.vevor.com/floor-jacks-c_11489/vevor-low-profile-floor-jack-2-5-ton-heavy-steel-single-piston-hydraulic-pump-p_010647646049
- VEVOR, 3 Ton Heavy-duty Steel Racing Floor Jack, Dual Pistons: https://www.vevor.com/floor-jacks-c_11489/vevor-low-profile-floor-jack-3-ton-heavy-duty-steel-dual-piston-rapid-pump-p_010115763447
- VEVOR, 4 Ton Low Profile Floor Jack: https://www.vevor.com/floor-jacks-c_11489/vevor-low-profile-floor-jack-steel-hydraulic-car-jack-4-ton-dual-piston-pump-p_010829278992
- VEVOR, Jack Stands category: https://www.vevor.com/jack-stands-c_12064
Meet your guide
Lipeiguan
author